OXYREVO Quest30 2.0 ATA Hard Hyperbaric Chamber

Less than a soft chamber, because there is no fabric, no zipper track and no seams. Scheduled items are the compressor and concentrator filters, changed every 6 to 12 months. Beyond that: wipe the interior down between sessions, keep the door seal clean and free of grit since that is the one component that maintains your pressure envelope, and sterilize the oxygen headset with rubbing alcohol between users. The anion purifier handles airborne bacteria during the session itself. There is no annual service requirement and no calibration.

No. Unlike a soft chamber there is nothing to build. The Quest30 arrives crated and fully assembled as a sealed steel pressure vessel. What it needs is delivery and placement, which is the hard part of this purchase. With free standard delivery the truck arrives and offloading, uncrating and moving a 507 lb crate into position is your responsibility. With White Glove Delivery we handle all of it. Once it is in the room, setup is connecting the oxygen concentrator and running through the controls, which we cover on your free Zoom session along with your first guided session.

Pressure and durability. Fabric physically cannot hold more than about 1.5 ATA, so if your protocol calls for 2.0 ATA a hard shell is the only option that exists. Steel also has no zippers, seams or fabric to wear out, which is what matters when a chamber runs multiple sessions a day for years. If 1.4 or 1.5 ATA covers what you are doing, buy a soft chamber and save $20,000. OurApex36does that well.

Red light therapy, an entertainment system and a water chiller. The entertainment system is the one most home buyers add, since it turns a daily hour into time you look forward to. The water chiller is worth considering if the chamber lives somewhere warm or you run back-to-back sessions. Ask us and we will price them with your build.

Yes, for home use. If you do not already have one, we can connect you with a provider who can issue it in a few minutes.

More pressure dissolves more oxygen into your blood plasma, and 2.0 ATA is roughly 14.7 PSI above the air in your room, compared to about 7.3 PSI at 1.5 ATA. It is the pressure most clinical protocols are written around. Whether you need it depends entirely on what you are doing and what your provider advises, which is worth settling before you spend at this level.

This chamber. The Quest30 at $27,999 is the lowest-priced route to a true 2.0 ATA in our range, under theQuest36at $29,999 and well under theSpace60at $45,999. Be careful comparing it against cheaper listings elsewhere, because most chambers advertised near this price are soft-shell units that top out around 1.5 ATA. They are not the same product and they cannot reach the same pressure.

Same chamber, same pressure, same features. TheQuest36is 36 inches in diameter instead of 30, and at current buy box pricing it is only $2,000 more at 2.0 ATA. On a purchase near $28,000 that is a small step for six inches of width you feel every session. Take the Quest30 if you are average build and would rather put that money toward add-ons. Take the Quest36 if you are broad through the shoulders or over six feet.

Value, mostly. The Quest chambers carry the features of monoplace chambers that sell for over four times the price, including 2.0 ATA capability, climate control, two-way communication and real-time monitoring. They also have the largest viewing windows of any lie-down chamber in this class, and the design suits a home or a clinic rather than looking like hospital equipment.

The 2.0 ATA build costs $3,000 more and adjusts down to 1.3 ATA, so it does everything the 1.5 ATA version does and more. Pressure capability is set during manufacturing and cannot be upgraded later. If there is any chance you will want 2.0 ATA within the life of the chamber, buy it now.