Penguin Chillers 1HP High Efficiency (HE) Water Chiller

☎️ Questions? Call us at 888-963-9454

✔️ Authorized Penguin Chillers Dealer
💰 Lowest Price Online Guaranteed
📦 FREE Shipping (48 States): Delivery in 4-8 weeks
🔒 1 Year Product Warranty / 🇺🇸 Made in the USA

***If you're going to use this chiller for Cold Therapy, please note this is a DIY setup. You'll need your own pump, filter, and tubing.***

Pump recommendation:
- Danner Mag-drive 950gph – 1800gph

Other pumps that may work:
- Lifeguard Aquatics - Quiet One Pro Series 4000, Quiet One Pro Series 5000, or Quiet One Pro Series 6000.
- Iwaki MD-20RLXT, MD-30RLXT, or MD-40RLXT

Other pumps may be acceptable, however they need to be rated for less than 10psi max pressure. Please be aware that since none of these are our official recommendation, if the pump somehow damages the chiller or fails to work in any way, we take no responsibility - this is a proceed at your own risk type of thing.

Filter recommendation:
Penguin Chillers Cold Therapy Replacement Filter (10" x 2.5", 50 Microns, Pleated)

Filter housing recommendation:
Geekpure 10-Inch Whole House Clear Filter Housing - 3/4"NPT Brass Port-Fit for 2.5" x 10" Filters

• • 11,500 BTU/hr
  • Comes with digital controller for monitoring and regulating temperature
  • As low as 37 °F / ~40°F in summer heat
  • For tubs up to 150 gallons
  • 1″ NPT inlet/outlet ports (female threaded PVC)
    
  • Titanium Heat Exchanger = Reef Tank Safe
  • Recommended operating range ~40°F to ~100°F
  • 59 dBA
  • 6′ Power Cord
  • 110 – 120 Volts / 7.2 Amps / 830 Watts
  • 19.25”W x 19.75”D x 14.25”H
  • 60 Pounds
  • 1 Year Product Warranty
  • Proudly made in the USA
     

    Our 1 HP HE Water Chiller comes with a titanium heat exchanger. A titanium heat exchanger keeps copper from coming into contact with your water. Because toxic levels of copper can build up in water being used for long periods of time, copper heat exchangers aren’t recommended for use in a closed loop aquarium setup. The use of titanium = Reef Tank Safe!

    
    

  Pump Recommendation for Reef Tanks

  • Pump: Danner Mag-drive 500gph – 1800gph. Other pumps may be acceptable, however they need to be rated for less than 10psi max pressure.  If you’re using a different pool/spa pump or any other pump rated in horsepower please talk with our tech support first. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our “Accessories” web page to view our selection of pumps and accessory packages available.